If a command encounters an error or times out during the second stage of
the conversion in Qubes, handle it the same way as we would have handled
it in the first stage:
1. Get its error message.
2. Throw an UnexpectedConversionError exception, with the original
message.
Note that, because the second stage takes place locally, users will see
the original content of the error.
Refs #567Closes#430
This should only affect the alpha version of Qubes OS (in containers
it only allows the attacker to control the timeout). In short, an
attacker could have PDF metadata that would show before "Pages:" in
the `pdfinfo` command output and this would essentially override the
number of pages measured in the server. This could enable the attacker
to shorten the number of pages of a document for example.
Fixes#565
When qrexec-client-vm fails, it could be a symptom of various issues:
- the system being out of RAM
- dz-dvm not existing
The exit code is the same in all cases (126), which makes it
particularly tricky to solve in the client application. For this reason
the approach is now to tell the user to see the qubes error notification
on the top right of their screen.
Add a sanity check at the end of the conversion from doc to pixels, to
ensure that the resulting document will have the same number of pages as
the original one.
Refs #560
Stream page data back to the caller, immediately after we read them from
pdftoppm. This way, we have more accurate progress reports and timeouts.
Fixes#557
Introduce 4 new methods that can be overloaded by the Qubes isolation
provider to stream page data/metadata back to the caller. For the time
being, these methods do what they did before, i.e., write this info in
files within the pixels directory.
Do not read a line from the command output and then check if
we are at EOF, because it's possible that the writer immediately exited
after writing the last line of output. Instead, switch the order of
actions.
This is a very serious bug that can lead to Dangerzone excluding the
last page of the document. It should have bit us right from the start
(see aeeed411a0), but it seems that the
small period of time it takes the kernel to close the file descriptors
was hiding this bug.
Fixes#560
Sets the detected OS color mode (dark/light) as a property on the
QApplication so it can be referenced in stylesheets to select style
rules suited to the OS color mode.
In Qubes OS it's often the case that the user doesn't have enough
RAM to start the conversion. In this case it raises BrokenPipeException
and exits with code 126.
It didn't seem possible to distinguish this kind of failure to one
where the user has misconfigured qrexec policies.
NOTE: this approach is not ideal UX-wise. After the first doc failing
the next one will also try and fail. Upon first failure we should
inform the user that they need to close some programs or qubes.
Theoretically the max pages would be 65536 (2byte unsigned int.
However this limit is much higher than practical documents have
and larger ones can lead to unforseen problems, for example RAM
limitations.
We thus opted to use a lower limit of 10K. The limit must be
detected client-side, given that the server is distrusted. However
we also check it in the server, just as a fail-early mechanism.
Add an error for interrupted conversions, in order to better
differentiate this scenario from other ValueErrors that may be raised
throughout the code's lifetime.
Store, in an instance attribute, the process that we have started for
the spawned disposable qube. In subsequent commits, we will use it from
other places as well, aside from the `_convert` method.
Note that this commit does not alter the conversion logic, and only does
the following:
1. Renames `p.` to `self.proc.`
2. Adds an `__init__` method to the Qubes isolation provider, and
initializes the `self.proc` attribute to `None`.
3. Adds an assert that `self.proc` is not `None` after it's spawned, to
placate Mypy.
Extend the client-side capabilities of the Qubes isolation provider, by
adding client-side timeout logic.
This implementation brings the same logic that we used server-side to
the client, by taking into account the original file size and the number
of pages that the server returns.
Since the code does not have the exact same insight as the server has,
the calculated timeouts are in two places:
1. The timeout for getting the number of pages. This timeout takes into
account:
* the disposable qube startup time, and
* the time it takes to convert a file type to PDF
2. The total timeout for converting the PDF into pixels, in the same way
that we do it on the server-side.
Besides these changes, we also ensure that partial reads (e.g., due to
EOF) are detected (see exact=... argument)
Some things that are not resolved in this commit are:
* We have both client-side and server-side timeouts for the first phase
of the conversion. Once containers can stream data back to the
application (see #443), these server-side timeouts can be removed.
* We do not show a proper error message when a timeout occurs. This will
be part of the error handling PR (see #430)
Fixes#446
Refs #443
Refs #430
Creates exceptions in the server code to be shared with the client via an
identifying exit code. These exceptions are then reconstructed in the
client.
Refs #456 but does not completely fix it. Unexpected exceptions and
progress descriptions are still passed in Containers.
This PR reverts the patch that disables HWP / HWPX conversion on MacOS
M1. It does not fix conversion on Qubes OS (#494)
Previously, HWP / HWPX conversion didn't work on MacOS M1 systems (#498)
because libreoffice wasn't built with Java support on Alpine Linux for
ARM (aarch64).
Gratefully, the Alpine team has enabled Java support on the aarch64
system [1], so we can enable it again for ARM architectures.
Fixes#498
[1]: 74d443f479
The "check for updates" button wasn't showing up immediately as checked
as soon as the user is prompted for checking updates. This fixes that.
Fixes#513
Reporting script now parses JunitXML instead of a series of
".container_log" files. The script in in changed submodule.
Additionally it makes failed tests actually fail so that this is
recorded in the JunitXML report.
Certain characters may be abused. Particularly ANSI escape codes.
Solution inspired by Qubes OS's hardening of ther RPC mechanism [1]:
> Terminal control characters are a security issue, which in worst case
> amount to arbitrary command execution. In the simplest case this
> requires two often found codes: terminal title setting (which puts
> arbitrary string in the window title) and title repo reporting (which
> puts that string on the shell's standard input. [sic]
>
> -- qvm-run.rst [2]
[1]: e005836286
[2]: c70da44702/doc/manpages/qvm-run.rst (L126)
Store the conversion log to a file (captured-output.txt) in the
container and when in development mode, have its output displayed on the
terminal output.
Use qrexec stdout to send conversion data (pixels) and stderr to send
conversion progress at the end of the conversion. This happens
regardless of whether or not the conversion is in developer mode or not.
It's the client that decides if it reads the debug data from stderr or
not. In this case, it only reads it if developer mode is enabled.
The markdown dependency uses importlib to monkeypatch 'html.parser'
[1]. Due to this approach 'html.parser' is never explicitly stated
as a dependency. This works fine in most cases, since it's part of
the python standard lib. But on Windows the build tool (CxFreeze)
ships in the .exe only the modules needed. And because html.parser
is never mentioned, it fails with an error (see issue #501).
Fixes#501
[1]: https://github.com/Python-Markdown/markdown/blob/master/markdown/htmlparser.py#L29
The HWP / HWPX conversion feature does not work on the following
platforms:
* MacOS with Apple Silicon CPU
* Native Qubes OS
For this reason, we need to:
1. Disable it on the GUI side, by not allowing the user to select these
files.
2. Throw an error on the isolation provider side, in case the user
directly attempts to convert the file (either through CLI or via
"Open With").
Refs #494
Refs #498
Sometimes, LibreOffice returns with status code 0, but in reality, it
fails. It doesn't create a file, and Dangerzone does not detect this.
What happens next is that it fails in the next command, and throws an
unrelated error.
Detect that LibreOffice fails, by checking if the output file exists,
after the PDF conversion.
